For example, rainfall can dilute the water and cause low hardness. The use of calcium hardness increaser can address this issue.
It is important to utilize calcium hardness increaser to maintain the Ph balance of your water.
The impact of not maintaining the ideal hardness level in your swimming pool may cause flakes build up on your and equipment. You have to maintain total hardness level in your water. So that your water does not get saturated.
The Use of Calcium hardness increaser
If you have an excessively high calcium level, a calcium hardness increaser can help. This chemicals works by adding the chemical calcium chloride to the pool water. This chemical is similar to the product used for melting ice and keeping walkways clear in winter, so it’s important that you use proper safety precautions when handling it. When you find your pool with low calcium hardness. It is important for you to raise calcium hardness and achieve total hardness of your pool.
The Benefits
Keeping the calcium level within the normal range is extremely important. Deterioration may occur metal parts. It can also etch the pool surfaces and hot tub making it difficult to clean.
If the calcium level is too low you can raise it by adding a calcium hardness increaser.
The Disadvantage
Keeping the levels of calcium hardness in your pool in an optimal balance range is a very important you can use a tester to determine pool maintenance. This, along with the pH and total alkalinity, can help prevent damage to equipment and promote a comfortable swimming environment.
If the calcium level is too low it can cause long term serious problems including metal deterioration on pool equipment, tile grouting, masonry pools and even concrete or liner walls.
If this is not possible then you can use muriatic acid as a last resort. However, this can be messy and is not very effective.
Who Uses It?
Most experts recommend a calcium hardness level between 200 and 400 parts per million (ppm).
If your water is too low, a calcium hardness increaser can be used to raise the levels. These products typically contain calcium chloride. This will increase your calcium hardness.
Baking soda can also be used to raise calcium hardness levels, but it should only be considered as a last resort and only when the levels have reached dangerously low levels. Since baking soda also raises the pH of the water, it can lead to corrosion of metal and concrete or plaster surfaces in the pool structure.
Some novice pool technicians believe that a calcium hardness reducer will permanently lower the level of calcium in the water. However, this is not the case. This will not be an effective way of maintaining your high calcium hardness level.
Where to Purchase
As with pH and chlorine levels, calcium hardness levels are best kept in the middle of the safe range, 200-400 parts per million. It is possible to have too low of a concentration, which can cause problems including corrosion and the formation of scale in the pool. The good news is that bringing the concentration up is much easier than lowering it. You can purchase by needed quantity in your local supplies stores.
A typical method of raising the is to add calcium chloride. This product can be purchased at any swimming pool store. A good amount to use is 2 ounces of calcium chloride for every 10 ppm of the concentration in your pool water. Next, you will need to know your pools current hardness level as indicated by your water test results. This can be done by using a pool water test kit or by finding out the concentration from your local municipal water utility company. It's important to have a calcium hardness in your pool supplies maintenance equipment.